Bsod 1a windows 7 reasons. How to fix MEMORY_MANAGEMENT blue screen errors (0x0000001A)

Among the unpleasant aspects of working with the Windows operating system, it is worth noting some system flaws that cause various types of errors. There are many reasons for the appearance of the “blue screen of death” or Blue Screen of Death, which indicates error 0x1A: memory management. Quite often, this problem is accompanied by prolonged freezing of the PC, “crash” from programs, and the computer stops working. Factors causing system failure often relate to drivers. If BSoD describes a video memory management internal error, then most likely the problem lies in the video card driver, or less often it is related to monitors. In any case, in order to correctly correct the error, it is important to understand its root causes.

Memory management error description

Inexperienced users, in the literal sense of the word, are afraid of a blue screen appearing, and immediately call a technician or try to interrupt Windows on their own. In some cases, the last method can help, but it still ranks last on the list of recommendations. To get rid of the memory management: stop 0x0000001a error, which caused a malfunction of the OS, it is not necessary to resort to extreme measures. It is enough to find out what caused the problem and try to eliminate its possible factors.

You can recognize the error by the following signs:

• the program collapses and a warning appears in the form of a blue screen describing the error;
• the computer restarts;
• the operating system responds slowly to commands and input using the keyboard or mouse;
• The system periodically freezes for a short time.

If the “screen of death” appears with any regularity, then you can track what caused this problem. Often the error appears after installing a certain program or connecting new equipment. Factors that contribute to Windows not working correctly are described below. You should study them carefully to begin correcting them.

Reasons for the Stop error

Both users of the new and advanced Windows 10 operating system, as well as fans of the older, but at the same time stable working “seven”, encounter problems such as memory management errors. The reasons for the error on both versions of Windows are largely the same. This could be a trivial malicious file that inadvertently went unnoticed by the antivirus, or serious hardware failures. Based on a range of factors, the approach to treating a personal computer must be comprehensive. Let's take a closer look at what moments precede the problem with code 0x0000001a.

On Windows 10

For Windows 10, the most common causes of memory management errors are the following:

1. Like many other blue screen warning signs, a memory management error is often associated with a conflict between a hardware driver and the operating system kernel. Perhaps BSoD began to pop up after connecting the peripherals. You should most likely update the driver to ensure the computer works correctly.
2. A recently updated driver may also fail. In this case, its new version does not meet the requirements of the operating system.
3. A rather banal, but obvious factor in problems with the operating system to this day is considered to be the presence of malware and viruses. Not always the installed antivirus can cope with this problem without user intervention.
4. Damaged system files do not allow the computer to work correctly and often cause a memory management error.
5. Failure of necessary equipment. This could be a damaged RAM, video card, hard drive or other PC components, without which its operation is impossible.
6. For the “ten”, such problems are typical if the BIOS used is outdated.

Most often, BSoD memory management on Windows 10 occurs for similar reasons as Windows 8, so treatment recommendations for both versions are very similar.

On Windows 7

A blue screen with error code x0000001a on Windows 7 can appear either due to the above factors, or for reasons more typical for the “seven”, among which are additionally:

1. Insufficient RAM, which, in fact, directly characterizes the problem.
2. Excessive processor heating.
3. A crowded registry that needs to be cleared of unnecessary information.

Based on all the above factors, you can build a confident troubleshooting algorithm. It is quite difficult for a person who does not have relevant experience in “treating” a personal computer to determine the exact cause at first glance. Moreover, not every specialist is able to do this. The approach to correcting an error must be comprehensive. Roughly speaking, by trial and error you can achieve positive results if you follow the right recommendations.

How to fix error 0x0000001a memory management

As a rule, the “blue screen of death” using a code indicates why a personal computer is not able to work correctly. Not all users have the special knowledge to perform corrections according to a specific reason encrypted in hexadecimal code. But if you know the possible factors causing the problem, it is easy to fix it, since each of them can be tried to be eliminated separately.

Fix for Windows 10

1. If, after connecting new equipment, a memory management error begins to appear on Windows 10, then the solution to the problem lies in a new device. You can verify this by disconnecting the device from the computer. If the blue screen has disappeared, then the reason lies in a mismatch between the device driver and the OS kernel. You need to update the driver or wait for the update to come out if it is not yet available. If several devices were connected to the computer at the same time, you need to disconnect them one by one to determine which of them led to the conflict.
2. Some control file updates are not compatible with Windows 10. Their automatic updating often leads to a system conflict. It is necessary to roll back the driver to an older version if we know which software is incompatible with this version of Windows. This can be done by opening Device Manager using the Win+R key combination. As a rule, the operating system is interested in why we need to roll back a certain driver. You should check the box next to “The previous version of the driver was more reliable.”
3. Memory management error code x0000001a on Windows 10 may appear due to a virus. Even if you have a reliable antivirus installed, some malware is able to bypass it. It is best to scan your computer manually with a valid antivirus or using the CureIT! from the developers of Dr.Web.
4. Viruses were found and destroyed, but the problem was not solved - this often happens if malicious programs managed to inherit and damage some files. You can find damaged files and restore them using the SFC utility. To do this, use the Win+X key combination to call up a menu in which we click on the “Command Prompt” line. In the window that appears, enter exe /scannow, after which the scan begins. The program will detect incorrect files; the main thing is not to forget to restart the computer after the operation is completed.
5. Any faulty hardware can cause a memory management error. Most often, RAM suffers. If there are several OP lines, it is necessary to determine which of them is faulty. To do this, you need to remove the petals one by one from the system unit or the corresponding compartment at the bottom of the laptop. If there is only one line, you can try cleaning the contacts. When this does not help, the RAM will have to be replaced. If any other device is faulty: video card, hard drive, motherboard, then after replacement the error will no longer appear.
6. An outdated BIOS needs to be updated to get your PC working properly again. When rebooting, you should enter the BIOS menu and find out information about the current version and manufacturer. After this, you need to go to the developer’s website, download a more modern version and install it on your computer.

Fix for Windows 7

1. To eliminate bsod memory management, which arose due to insufficient RAM, you need to add an additional line of RAM. Otherwise, it will be impossible to run a heavy program or work with several at once.
2. Heavy programs make your PC work harder and generate heat. Sometimes this is what precedes various problems. You can try to disassemble the system unit, clean the components from dust, thoroughly clean the CPU cooler and replace the thermal paste on the processor.
3. The CCleaner program will help you deal with garbage in the Registry. You should set the “Search for Problem” command in the Registry tab. After troubleshooting, you need to restart your computer.

Regular updates, checking your PC for viruses, and cleaning the system unit will to some extent help avoid malfunctions, but not everything depends on the user. Iron wears out from long-term use and requires replacement and restoration. In addition, each new version of the OS and software requires more advanced additional parameters, thanks to which the computer will work faster in multitasking mode, avoiding conflicts with modern programs.

Conclusion

As has already become clear, a computer launching a BSoD with a memory_management error directs our attention to the memory problem, so the primary diagnostic method here is to check the serviceability of the RAM and hard drive. However, other factors also cause the Windows operating system of different versions to sound the alarm about a malfunction. It is important to know what reasons precede this in order to easily eliminate the error.

STOP Code: 0x0000001A

If this is your first time seeing something like this, congratulations - you've encountered the infamous Blue Screen of Death, and we're here to help.

Photo of this error in Windows 10. A Blue Screen of Death occurs when your computer encounters something it can't handle, and the name it displays is compiled from what it can understand, which is usually pretty accurate and leads to you solving your problem. If your computer was unavailable due to a MEMORY_MANAGEMENT error, you will need to check and replace RAM(Random Access Memory). If you're using a desktop, this should be easy - turn off your computer, open your case, take out your RAM sticks and pop into new ones. (Be sure to make sure they are compatible and inserted correctly - RAM offset can also cause this problem!)

If this doesn't work or you are using a laptop, the problem may be more serious. Your processor may be placed improperly in the slot, damaged, or faulty. If you're a desktop user who knows what you're doing, you might want to check it out. Otherwise, contact your manufacturer for return or repair.

If your computer is usable but constantly suffers from this MEMORY_MANAGEMENT BSoD, try:

• Run Windows Memory Diagnostic Tool. Click Start, enter mdsched.exe and let the tool check your computer memory (RAM) for problems.
• Update BIOS and drivers. BIOS updates can be found on the manufacturer's website, and driver updates can be performed manually through Device Manager (use "Start Search") or using our software.
• Check for viruses using your antivirus software or

Computer technology today is one of the most rapidly developing areas of activity in our civilization. On the one hand this is good, but there are also negative sides. For example, a person can purchase what seems to be modern and up-to-date equipment, but after a few months it will begin to malfunction under loads that have increased several times during this time. As a result, the operating system begins to signal the user about problems that have arisen. One of them may well be a Windows 10 memory management error.

Fortunately, most of these problems can be corrected. The main thing is to know their cause and methods of treatment. So, how to fix Windows 10 memory management error?

The most popular causes

If we consider this problem in general, then the memory management error code signals the user about some troubles with the memory being used. Since it is when accessing this resource that the memory management error in Windows 10 occurs.

By the way, a similar situation can also occur on older versions of the operating system from Microsoft, so the analysis of treatment methods described below will also be useful for owners of PCs that use eight or seven.

The reasons for the RAM failure, which prevent it from working fully when the “video memory management internal” message appears, may be the following factors:

• Activation of various virus programs.

• Physical malfunction of the installed memory stick.

• Trouble with the hard drive.

• Outdated version of the BIOS used.

• Problems with the drivers used.

• Incorrectly configured power supply.

So, there is a memory management blue screen in Windows, there is a list of possible reasons. You can begin to solve the problem.

Method of treating the problem

Naturally, it is recommended to start fixing a memory management error by analyzing the performance of the RAM. If this problem appears on the eight, then you must first of all launch the control panel (in safe mode) and find the line “Windows memory diagnostic” in the list of available options. If there is another system, you will have to first download one of the specialized programs from the network or disk. For example, MemoryTest or its equivalent.

If, after such a diagnosis, the blue screen of Windows 7 (8.10) memory management still constantly appears, then you need to check the installed memory levels manually. It’s very good when there are several of them. In this case, the owner of the computer is required to alternately remove them from the slots and start the PC to find out whether the memory management Windows 8 (7.10) error appears. If there is none, the removed bar will have to be replaced. It is more difficult to perform such a check when using only one product. In this case, you need to find somewhere else - one that is guaranteed to work.

Eliminating the influence of viruses is as easy as shelling pears. It is enough to install and run one of the current antivirus programs. Naturally, the most complete verification is required.

If all of the above steps did not give a positive result, move on to the BIOS and drivers. If memory management pops up after installing Windows 10, then the reason may lie in these options. It is advisable to update drivers manually - through the device manager. Of course, now you can download a variety of software designed for this purpose, but such programs often fail, so it’s better to do everything yourself, without relying on automatic algorithms.

If the user is confident that the cause of bsod memory management is the BIOS, then it is necessary:

1. Restart the computer and go into BIOS.
2. Find out the current version and manufacturer.
3. Go to the developer’s website and download the most current version. Perform reinstallation.

The last possible action is to scan for problems on the working hard drive. There are two options here, but it is advisable to use them all:

1. Force the system to execute sfc /scannow by entering an order into the command line.
2. Download one of the specialized programs and diagnose the hard drive.

The final possible cause concerns the power supply. Naturally, it is only relevant for laptop PCs. To level it out, you will have to go into the settings of your laptop or netbook and set the power to balanced mode.

Strict adherence to the described instructions almost always guarantees complete treatment of this disease, which prevents a person from fully using personal electronic equipment.

MEMORY_MANAGEMENT is a Blue Screen of Death, also known as error code 0x0000001A. The main reason why this problem occurs is because of an error that occurred during memory management.

If your computer is experiencing this problem, it means that something has happened to your software, operating system, or hardware memory management subsystem. To determine where exactly the error occurred, we will have to conduct various checks at all three levels.

It is also worth noting that it does not matter what Windows operating system you are running on, because... The error can appear on any version of it. So this article is suitable for all users. So, let's look at the solution methods that will help you get rid of the MEMORY_MANAGEMENT blue screen of death.

Method #1 Undo recent changes

That's right, if you recently made some changes on your computer, for example, installed new programs, then there is a chance that the problem with the system crash was their fault.

It is possible that some programs on your computer were installed without your knowledge. Check the lists of installed programs and remove any that were recently installed, as they may be causing the MEMORY_MANAGEMENT error.

Method No. 2 Removing drivers

In addition to installed programs, some drivers on the computer can create certain conflicts in the system, which result in such failures. For example, you installed a new video card in your system, but the drivers on your computer are still from the old model. As soon as the system tries to make the new device work on old drivers, then a conflict may occur.

Based on this example, remove those drivers that you think could be causing this problem. To remove drivers, you can use the system Device Manager, where you will find a list of all devices running on your computer. Right-click on Start and select Device Manager.

Find in the list the device in which you see the culprit of the blue screen MEMORY_MANAGEMENT. Right-click on it and go to Properties. Then click on “Driver” and click “Uninstall”.

Method No. 3 Restoring factory settings

If you recently overclocked some hardware inside your computer, then this very overclocking could lead the system to a state of instability, after which, in turn, the blue screen of death MEMORY_MANAGEMENT appeared.

To fix this problem, you just need to return your overclocked hardware to factory settings. As soon as you return everything to its original place, test the system. If everything goes well this time, then the issue was definitely a failure of overclocking.

Method #4 New hardware

System failures can also occur due to new hardware that has just been installed in the system. For example, if you installed a brand new RAM stick and then immediately began to experience system failures, then the problem most likely lies in this particular hardware.

Try removing it from the system or replacing it with an old sample. Test your PC for a while. If everything goes well and failures like the MEMORY_MANAGEMENT blue screen of death do not manifest themselves, then, unfortunately, the problem is in the new hardware.

As mentioned above, the issue may be incompatible drivers on which the operating system is trying to make the new hardware work. However, it may also happen that the new purchase simply did not work correctly. In this case, there is little that can be done - contact a service center, where they will inspect the faulty hardware.

Method No. 5 Checking RAM

If you start to experience blue screens of death, then the first thing you can do is start looking sideways at your RAM. It is possible that some of your RAM sticks have started to work with malfunctions and errors.

So, you can check your RAM in different ways. To begin with, you can conduct an external inspection of the slats to make sure they are in good condition. You can also remove them from the motherboard and wipe the contacts with a rubber float or cotton swab with alcohol (just don’t overdo it!).

Next, you can perform a software test of the RAM. This can be done either using system forces or using a utility called MemTest86. We will now describe a method of checking through the system utility

• Press the keys simultaneously Win+S.
• Next, write in the search bar “Diagnostics of computer RAM problems.”
• Select the search result that appears and the “Windows Memory Checker” window will appear in front of you.
• You will be given two choices. You need to select the first option and then your PC will reboot.
• When you start your computer, the “Windows Memory Checker” will appear on your screen, which will check your RAM.

That's all. As soon as the scan is completed, your computer will reboot again and you will see the scan results in the operating system itself.

Method No. 7 Performing a system recovery

If none of the above helped, then it’s time to move on to system recovery. This solution is, so to speak, the “ultimate” with blue screens of death, including also MEMORY_MANAGEMENT. Using System Restore, you can note all the recent changes to your system that caused this problem to occur. To restore, do the following:

• Click Win+S.
• Enter “System Restore” into the search bar.
• Next, select “Run System Restore” and follow the onscreen instructions.

Method #8 Reinstall Windows

Unfortunately, if even System Restore did not help you save yourself from the MEMORY_MANAGEMENT BSOD, then there is only one thing left - reinstalling Windows. On a clean operating system this problem should no longer exist.

Found a typo? Select the text and press Ctrl + Enter

Today, it is not uncommon for such a situation to happen: a person has purchased what seems to be a modern computer, and after a few months he is surprised to see that his electronic property has begun to cope with the assigned tasks worse. Not only is it slower, but it also constantly reports about some conflicts and failures. For example, a memory management error in Windows 10 indicates that the RAM is not able to fully function.

Yes it's sad. Yes, it's unpleasant. But something must be done! Naturally, first of all, find the answer to the question: memory management error Windows 10 - how to fix it?

The answer to this question will allow us to develop a method for correcting this problem.

What could lead to such a situation?

The analysis of the task at hand can begin with the information that the “memory management error code” message provides us with. Even a person who does not know English well should understand that this inscription indicates some problems with the RAM used.

That is, the situation looks like this:

• A program or hardware accesses operating memory.
• This resource begins to experience problems because, for some reason, it can no longer cope with the load.
• A message immediately appears on the screen - memory management error Windows 10, 7 or 8.

Why is this possible? There are several possible reasons for this. And there are more of them than in Nikolaev’s famous song. So, what can cause video memory management internal:

• Believe it or not, the harmful effects of viruses can lead to a similar situation.
• The memory stick is faulty at the physical level.
• There is trouble with the hard drive you are using.
• The BIOS you are using is outdated and urgently requires updating.
• Something happened to the installed drivers.
• Incorrect power settings on laptop computers.

So, we got all the necessary information about what causes the Windows memory management blue screen. Let's go further - return the computer to normal operating condition.

We solve the problem ourselves

We will treat the PC according to the list of memory management errors presented above. Fighting viruses? As easy as pie:

• We go online and download a good antivirus program.
• We install this software, run a deep scan and wait for the results.

If this did not help fix the blue screen of Windows 7 (8.10) memory management, then move on to testing the installed memory. The easiest way to perform a similar procedure is in the eighth version of the operating system, since it has the necessary built-in tool. For other options, you will have to download specialized software, for example, MemoryTest or its closest analogue. If your PC has several memory sticks at once, you can also check them manually. To do this, you will need to gain access to them, turn off the power and remove the RAM from the slots one by one to check whether the memory management error Windows 8 (10, 7) continues to manifest itself?

The next step is to resolve the issue with the outdated BIOS version. If memory management pops up after installing Windows 10, then there is a high probability of this being the case. To fix you will need:

• Restart the computer and go to the BIOS menu.
• Find out the manufacturing company and the current version.
• Go to the official website of the developer, select the most recent version, download it and install it.

Problematic drivers and bsod memory management are solved as follows:

• Start the computer in safe mode.
• Go to Device Manager.
• Update control files using the settings menu of each equipment.

It remains to check the last two possible root causes. For the first of them, namely troubles with the hard drive, you need to run diagnostics and self-fix, which is available in every Microsoft operating system:

• Start menu.
• Launch the command line.
• Entering an order for execution: “sfc /scannow”.
• Additionally, you can run one of the specialized programs from other developers - you won’t spoil the porridge with oil.

Regarding problems with power supply, everything here is also quite simple and elementary. Launches the system control panel and searches for the item responsible for this characteristic. You will need to re-check the box to select balanced mode.